1
Blackthorn Road, Didcot
One of the many roads of Great Western Park, a large modern housing development to the west of Didcot.
Image: © Oscar Taylor
Taken: 3 Mar 2024
0.07 miles
2
Blackthorn Road, Didcot
One of the many roads of Great Western Park, a large modern housing development to the west of Didcot.
Image: © Oscar Taylor
Taken: 3 Mar 2024
0.09 miles
3
Barn Owl Way, Didcot
One of the many roads of Great Western Park, a large modern housing development to the west of Didcot.
Image: © Oscar Taylor
Taken: 3 Mar 2024
0.09 miles
4
Benchmark on #139 Brasenose Road (Churchill Road face)
Ordnance Survey cut mark benchmark described on the Bench Mark Database at http://www.bench-marks.org.uk/bm21995
Image: © Roger Templeman
Taken: 11 Nov 2010
0.09 miles
5
Cherry Tree Road / Blackthorn Road, Didcot
Looking from Cherry Tree Road to Blackthorn Road. The road heading to the left is Mallard Drive. These are all roads of Great Western Park, a large modern housing development to the west of Didcot.
Image: © Oscar Taylor
Taken: 3 Mar 2024
0.10 miles
6
Mallard Drive, Didcot
One of the many roads of Great Western Park, a large modern housing development to the west of Didcot.
Image: © Oscar Taylor
Taken: 3 Mar 2024
0.12 miles
7
Yew Tree Crescent, Didcot
One of the many roads of Great Western Park, a large modern housing development to the west of Didcot.
Image: © Oscar Taylor
Taken: 3 Mar 2024
0.13 miles
8
Cornflower Close, Didcot
One of the many roads of Great Western Park, a large modern housing development to the west of Didcot.
Image: © Oscar Taylor
Taken: 3 Mar 2024
0.13 miles
9
61-75 Cherry Tree Road car park
In Great Western Park, a large modern housing development to the west of Didcot.
Image: © Oscar Taylor
Taken: 3 Mar 2024
0.14 miles
10
Dry verges
Lots of modern houses (and new rooves on old houses) have dry verges, such as this house. The verge of a roof is the section of detailing along the top of the gable end, to create a seamless join where the wall meets the roof. A dry verge is a series of usually plastic edging pieces fixing the edge of the roof down.
A dry verge is a very economical way of doing a verge as it saves the need for wet trades (mortar). It is very quick to install with some systems requiring a few screws, whilst others simply clip in place. This is in comparison to the typical way of installing a verge with pointing, bargeboard (sometimes) and undercloaking.
However, dry verge does have a distinct disadvantage of being weak against strong winds, with sections being prone to snapping off. On this house the dry verge has been repaired at least 3 times and there is another piece next to the ridge which requires re-clipping. This gable end faces south west, which is the direction of the prevailing wind in most of the UK, which will likely explain this.
Image: © Oscar Taylor
Taken: 3 Mar 2024
0.15 miles