1
Terraced housing on Edenfield Road, Wolstenholme
Image: © JThomas
Taken: 25 Sep 2018
0.01 miles
2
Edenfield Road, Wolstenholme
Looking north west on the A680.
Image: © JThomas
Taken: 25 Sep 2018
0.05 miles
3
A680 passing entrance to Nutters restaurant
Image: © Colin Pyle
Taken: 23 Apr 2021
0.09 miles
4
Scout Moor Wind Farm Official Opening
Having seen some of my images on this very web site http://www.geograph.org.uk/gallery/scout_moor_wind_farm_under_construction_6568
the developers Peel Holdings contacted myself for permission to use the above images plus quite a number of others on separate stands at the official opening which took place at Nutters Restaurant in Norden near Rochdale followed by a ribbon cutting ceremony up on the moor on the 25th of September 2008.
The above display was also used at the Wind Energy event in London during October 2008.
Top row from left to right are
Image
Image
Image
Bottom row from left to right
Image
Image
Image
Following a public inquiry held in 2004, planning consent was granted by the Secretary of State on the 25th May 2005 for the building of Scout Moor Wind Farm.
Construction of the wind turbines began back in November 2007 at Turbine No 16.
By June 2008 engineers had constructed 26 wind turbine towers and installed 78 turbine blades 450 metres above sea level on Scout Moor amid adverse weather conditions of thick fog, gale force winds, torrential rain, snow and ice during the winter months of 2008.
On the 25th of September 2008 dignitaries from across the North West were invited to the official opening of the Scout Moor wind farm.
Children from Edenfield Primary School, who have enjoyed lessons based around the wind farm, were on hand to cut the ribbon at Turbine No 22.http://www.geograph.org.uk/photo/980311
Head Teacher at Edenfield Primary School, Janet Reidy, said: "It was superb for the children to be involved after all the work they had done about the wind farm in their lessons.
I think they will all remember this in future years and now they know what it's like to be film stars with all the camera crews there!"
Richard Dibley, wind power development manager at Peel, said at the opening: "We have welcomed people here today to thank them for their patience and understanding during the construction period and for them to see the wind farm in action at close quarters. I think we have chosen the perfect site here as it is more than 50% windier up here than it is in the surrounding area. These turbines will be generating power for years to come using a natural resource that will never run out."
Image: © Paul Anderson
Taken: 25 Sep 2008
0.10 miles
5
Nutters Restaurant
Originally an 18th century manor house, Nutters set in 6½ acres of groomed parkland off Edenfield Road, Norden.
http://www.nuttersrestaurant.co.uk/about_nutters_restaurant.html
Image: © David Dixon
Taken: 12 Feb 2010
0.12 miles
6
Derelict weaving shed, Baitings Mill
Now a housing development. This firm specialised in moleskin. We were let loose in the works with permission.
Image: © Chris Allen
Taken: 1 Jun 1999
0.19 miles
7
Steam engine - Baitings Mill, Norden
This engine powered a cotton weaving shed near Rochdale and is now in the Museum of Making in Canada. It is a horizontal tandem compound built in 1895 by SS Stott of Haslingden. The cylinders are 12.5" & 24.25" x 3' with Corliss valves on the high pressure and a slide valve on the low pressure. The jet condenser and air pump are below the low pressure cylinder. the flywheel is 14' diameter. It could develop about 250 horsepower at 65-67 rpm.
Image: © Chris Allen
Taken: 15 Apr 1989
0.19 miles
8
Steam engine - Baitings Mill, Norden
This engine powered a cotton weaving shed near Rochdale and is now in the Museum of Making in Canada. It is a horizontal tandem compound built in 1895 by SS Stott & Co of Haslingden. The cylinders are 12.5" & 24.25" x 3' with Corliss valves on the high pressure and a slide valve on the low pressure. The jet condenser and air pump are below the low pressure cylinder. the flywheel is 14' diameter. It could develop about 250 horsepower at 65-67 rpm.
Image: © Chris Allen
Taken: 15 Apr 1989
0.19 miles
9
Steam engine - Baitings Mill, Norden
This engine powered a cotton weaving shed near Rochdale and is now in the Museum of Making in Canada. It is a horizontal tandem compound built in 1895 by SS Stott of Haslingden. The cylinders are 12.5" & 24.25" x 3' with Corliss valves on the high pressure and a slide valve on the low pressure. The jet condenser and air pump are below the low pressure cylinder. the flywheel is 14' diameter. It could develop about 250 horsepower at 65-67 rpm.
Image: © Chris Allen
Taken: 15 Apr 1989
0.19 miles
10
Steam engine - Baitings Mill, Norden
This engine powered a cotton weaving shed near Rochdale and is now in the Museum of Making in Canada. It is a horizontal tandem compound built in 1895 by SS Stott of Haslingden. The cylinders are 12.5" & 24.25" x 3' with Corliss valves on the high pressure and a slide valve on the low pressure. The jet condenser and air pump are below the low pressure cylinder. the flywheel is 14' diameter. It could develop about 250 horsepower at 65-67 rpm.
Image: © Chris Allen
Taken: 15 Apr 1989
0.19 miles