IMAGES TAKEN NEAR TO
Jepson Street, DARWEN, BB3 2NX
Introduction
This page details the photographs taken nearby to Jepson Street, BB3 2NX by members of the Geograph project.
The Geograph project started in 2005 with the aim of publishing, organising and preserving representative images for every square kilometre of Great Britain, Ireland and the Isle of Man.
There are currently over 7.5m images from over14,400 individuals and you can help contribute to the project by visiting https://www.geograph.org.uk
Image Map
Images are licensed for reuse under creativecommons.org/licenses/by-sa/2.0
Notes
- Clicking on the map will re-center to the selected point.
- The higher the marker number, the further away the image location is from the centre of the postcode.
Image Listing (79 Images Found)
Images are licensed for reuse under creativecommons.org/licenses/by-sa/2.0
Image
Details
Distance
1
Former mill, Darwen
This is presumed to be a reused small textile mill of some description with a square stone chimney. Across the road is the monumental India Mill chimney. I would welcome any further information about this small works.
Image: © Chris Allen
Taken: 4 Mar 2012
0.09 miles
2
Darwen - Bolton Road house opposite Gregson Street
Image: © Dave Bevis
Taken: 21 Jul 2014
0.10 miles
4
India Mill Entrance and Preserved Steam Engine
Image: © Robert Wade
Taken: 23 Jul 2009
0.11 miles
5
The Warehouse
Kitchens, bedrooms and bathrooms on Bolton Road, Darwen
Showing position of Postbox No. BB3 317.
See Image] for postbox.
Image: © JThomas
Taken: 10 Sep 2018
0.12 miles
6
George VI postbox on Bolton Road, Darwen
Postbox No. BB3 317.
See Image] for context.
Image: © JThomas
Taken: 10 Sep 2018
0.12 miles
7
Darwen - terrace up Radford Street
Photo taken from Bolton Road.
Image: © Dave Bevis
Taken: 21 Jul 2014
0.12 miles
8
Geograph photographer at large
Ashley Dace just getting his kit out to photograph the preserved cross compound mill engine by India Mill, Darwen.
Image: © Chris Allen
Taken: 4 Mar 2012
0.12 miles
10
Steam engine near India Mill, Darwen
J & E Wood of Bolton horizontal cross compound mill engine. Corliss valves and rope drive. Preserved in the open and surviving surprisingly well when photographed.
I had been led to believe this is the engine that James Mason stops in the opening sequence of the film Spring and Port Wine. However, looking at an online clip shows that the cylinders are the opposite way round with the high pressure on the left.
Colin Bowden has pointed out that the engine in the film was in fact at Joseph Johnson's Deane Shed in Bolton. That engine (Deane Shed) was built in 1907 and George Watkins gives the cylinders as 17" & 32" x 48". It developed 450 horsepower at 78 rpm on steam at 150 psi. It is claimed to have stopped in 1965 so must have been recommissioned for the film.
Image: © Chris Allen
Taken: 26 Mar 1994
0.12 miles