Cottingham Pumping Station - steam engine, basement
Introduction
The photograph on this page of Cottingham Pumping Station - steam engine, basement by Chris Allen as part of the Geograph project.
The Geograph project started in 2005 with the aim of publishing, organising and preserving representative images for every square kilometre of Great Britain, Ireland and the Isle of Man.
There are currently over 7.5m images from over 14,400 individuals and you can help contribute to the project by visiting https://www.geograph.org.uk
Cottingham Pumping Station - steam engine, basement
Image: © Chris Allen Taken: 30 Aug 1994
One of the three engines installed in 1930 and the only survivor. A large example but short of the biggest in the UK. The engine was built by Worthington-Simpson Ltd of Newark-on-Trent and is works No. 5048, built in 1930 and retired in 1974. The three cylinders are fitted with drop valves and measure 18", 31" and 50" x 4' stroke. The engine took steam at 200 psi, ran at 24 rpm and developed 350 pump horsepower. The flywheel is 14' 3" diameter. The engine operated three ram type force pumps that were mounted below the engine and operated by rods from its crossheads. This view in the basement shows the three ram pumps. Two of the pump crossheads also operate smaller pumps that I interpret as air and boiler feed pumps. The lower edge of the flywheel is seen in the top background.
Images are licensed for reuse under creativecommons.org/licenses/by-sa/2.0
Image Location
Latitude
53.793945
Longitude
-0.411889