Regent Mill, Failsworth

Introduction

The photograph on this page of Regent Mill, Failsworth by Chris Allen as part of the Geograph project.

The Geograph project started in 2005 with the aim of publishing, organising and preserving representative images for every square kilometre of Great Britain, Ireland and the Isle of Man.

There are currently over 7.5m images from over 14,400 individuals and you can help contribute to the project by visiting https://www.geograph.org.uk

Regent Mill, Failsworth

Image: © Chris Allen Taken: 6 Aug 2006

This spinning mill was built in 1906 to the design of G Stott and housed 60,000 ring spindles driven by a Buckley and Taylor inverted vertical triple expansion engine of 1800 horsepower. The cylinders had Corliss valves and were 24", 39" & 63" bores x 4' 6" stroke. It ran at 75 revolutions per minute and drove by 36 ropes from the 26' diameter flywheel. The mill ceased production in 1966 but remains in good condition and in alternative commercial use. This view is through the gates and shows the stair tower with its hotel de ville type top. To the right is the windowless section that shows the position of the rope race that housed the pulleys driving the mill. The projecting engine house is out of sight to the right. The edge of the single storey office building is just visible on the left.

Images are licensed for reuse under creativecommons.org/licenses/by-sa/2.0

Image Location

coordinates on a map icon
Latitude
53.508637
Longitude
-2.160997