The Dover Engine

Image: © Ashley Dace Taken: 1 Aug 2010

Worthington Simpson No 5056 was built in 1937 with sister engine No 5055. However, this engine laid boxed up at Worthington Simpson's works in Newark during the war years. Even though war in Europe ended in 1945 it wasn't until 1954 that 5056 was unboxed and commissioned in service. Joining 5055 (working from 1939) at the Connaught Road Pumping Station, Dover. The high labour costs associated with the running of the engines meant that despite being virtually unworn, the engines commercial lives were over in the early 1970's. They were the last reciprocating waterworks steam pumping engines of any notable size to be erected for public waterworks service in the UK, one destined for preservation plans were drawn to remove some 85 tons of engine. Eventually taking about thirty lorry loads to get it to Forncett. Its design is of an inverted triple expansion type having three cylinders, 14 inch, 26 inch and 42 inch diameter by 36 inch stroke. High pressure steam at 185 pounds per square inch was introduced through piston drop valves driven by a camshaft along the cylinder fronts first to the high pressure cylinder, then as it exhausted from here through a steam jacketed re heater it went to the intermediate pressure cylinder. The steam then went through the re heater again before reaching the low pressure cylinder. When exhausted from there, the steam was led to a condenser where the atmospheric pressure increased the efficiency of the engine. See the engine in situ Image]

Images are licensed for reuse under creativecommons.org/licenses/by-sa/2.0